> For the complete documentation index, see [llms.txt](https://learn.firecut.ai/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://learn.firecut.ai/features/create-highlights.md).

# Create highlights

## **❓ What is it?** <a href="#id-906c3645-dc50-4066-a36a-3d30bebe8cda" id="id-906c3645-dc50-4066-a36a-3d30bebe8cda"></a>

Create highlights finds the most engaging moments in your sequence and turns them into short, ready‑to‑share clips. Ideal for shorts, reels, teasers, and social cut‑downs.

## **🤔 How does it work?** <a href="#id-748ef1cd-b8e5-4655-999e-bb9b5a747dd3" id="id-748ef1cd-b8e5-4655-999e-bb9b5a747dd3"></a>

* FireCut analyses your audio transcript to spot moments that work on their own.
* It adds a red chapter marker named "FC Highlight" across each highlight, from its start to its end.
* You can review, move, add or delete highlights, then create new sequence(s).
* Optional: re-frame to 9:16, add captions, add B-roll and generate descriptions.

{% embed url="<https://www.youtube.com/watch?v=tRrYWQ3PKb4>" %}

## **⚙️ Settings** <a href="#bf1b5453-21ad-4367-a3e3-759520525c5b" id="bf1b5453-21ad-4367-a3e3-759520525c5b"></a>

* **Detection**
  * **Number of highlights:** Roughly how many highlights to look for per hour of footage, from **Low (\~5 per hour of footage)** to **High (\~20 per hour of footage)**. The default, in the middle, is 12.5 per hour.
  * **Highlight duration:** How long you want each highlight to be, from 5 to 120 seconds. Drag both ends of the slider to set a range. The default is 30 to 60 seconds.
  * **Scope:** **Full sequence** or **In / Out points** (set them with the `I` and `O` hotkeys). Create highlights needs at least 1 minute of your sequence.
  * **Accuracy:** **Enhanced accuracy of highlight start/end times (2x longer processing time)** gives tighter start and end times. It doesn't change which moments are found.
  * **Language:** Set the spoken language (non-English is experimental).
* **Edit highlights**
  * **Highlights list:** Click a highlight to jump to it in your sequence. Move the start or end of its red chapter marker to adjust it, or click "X" to delete it.
  * **Add new:** Select a range with In / Out points, then click **+ Add new highlight**.
  * **Overlap guard:** If highlights overlap, **Create new highlights sequence(s)** is disabled and the panel shows "Unable to create highlights as they are overlapping".
  * **History:** Running **Find highlights** again replaces all the "FC Highlight" markers in your sequence, including any you moved. To go back to an earlier set, click it under **History** on the first screen: it reopens with its markers, without finding the highlights again. **Clear all** empties the history.
* **Create sequences**
  * **Re-frame to 9:16 (vertical video)**
    * **Premiere Pro auto-reframe:** Follows the part of the frame with the most motion. **Motion tracking speed** can be **Slower** (the default), **Default** or **Faster**. Auto Reframe keeps working for a few minutes after FireCut has finished, so wait for it before you export. You can follow its progress in the bottom-right corner of Premiere Pro.
    * **Custom re-framing (detect faces):** In beta. FireCut suggests viewboxes based on the faces in your video, and you can fine-tune them. Use **Views** to choose how many, up to 3 (the default is 2).
  * **Add captions:** Adds captions to each highlight in your current captions style. Click **Captions configuration** to change it.
  * **Find B-roll:** Adds Storyblocks B-roll to each highlight. These clips are watermarked previews, so click **Upgrade B-rolls** on the results screen before you export (see [Find B-roll](https://learn.firecut.ai/features/find-b-roll.md)).
  * **Generate descriptions:** Writes a description of each highlight for social posts. On the results screen you can copy each one, click **Regenerate**, or click **Copy all descriptions**.
  * **Create multiple sequences:** Makes a separate sequence for each highlight, named after it. When it's off (the default), FireCut makes one sequence with all the highlights in order and a 60-second gap between each one.
  * **Output:** The sequences go in a new bin inside the "Highlights" bin, in the "FireCut" bin of your project. FireCut also removes the "FC Highlight" markers of the highlights it used from your original sequence. With a highlights sequence open, **Edit highlights** on the first screen takes you back to its results and descriptions.

## **💡 Tips for best outcomes** <a href="#c8886f6f-8f7e-4f06-b2a7-cebc11db53cc" id="c8886f6f-8f7e-4f06-b2a7-cebc11db53cc"></a>

* **Use In/Out points** to focus detection on the most relevant section.
* **Pick a sensible duration range** (e.g., 15–60s) to get tighter, punchier clips.
* **Turn on Enhanced accuracy** to get better timing accuracy for the highlights.
* **For vertical export**, re‑frame to 9:16; use Auto Reframe for speed, Custom for control.
* **Creating multiple sequences** is great when you want **separate** exports per highlight.

## **🙋‍♂️ Common questions, issues, watch-outs** <a href="#fc1e5cbd-9dd3-468b-acf3-2c67948b835c" id="fc1e5cbd-9dd3-468b-acf3-2c67948b835c"></a>

* **"No highlights found"** -->
  * Try widening the duration range or using a longer scope. Ensure the audio is clear enough to transcribe.
* **"The selected section is too short for generating shorts"** -->
  * Create highlights needs at least 1 minute of your sequence. Pick a longer scope.
* **"Transcript is too short for generating shorts"** -->
  * FireCut found fewer than 50 words of speech in the scope. Check your audio is loud and clear.
* **"The Create new highlights sequence(s) button is disabled"** -->
  * Highlights are overlapping. Adjust or delete overlaps in the Edit highlights view.
* **"The highlights start/end a bit off"** -->
  * Move the red chapter markers directly, or tick **Enhanced accuracy of highlight start/end times** before you run **Find highlights**.
* **"Vertical framing isn't centred"** -->
  * Use **Custom re-framing (detect faces)** and adjust viewboxes; or try a different **Motion tracking speed**.
* **"Descriptions didn't appear"** -->
  * Click **Regenerate**, or make sure **Generate descriptions** was ticked before you created the sequences.
* **"My highlight markers disappeared"** -->
  * FireCut removes the "FC Highlight" markers when you create sequences or run **Find highlights** again. Reopen the run from **History** to get them back.
* **"There's a gap between my highlights"** -->
  * When **Create multiple sequences** is off, FireCut leaves 60 seconds between highlights in the combined sequence, so you can export each one on its own.
